Warehouse separation nets are used to divide storage areas within industrial halls or to secure goods from falling sideways. Side protection is often useful on mezzanines to protect the goods from a higher fall. In a net for securing the goods, the strength and mesh size depends on the expected load. In this case similar meshes are used as in the vertical securing of high shelves. If the network is only used for separation of areas, simpler variants with a material thickness of 1.5 to 2.5 mm can be used.
flame-retardant according to DIN 4102 (B1)
with reinforced selvage cord
Rope Diameter: 1.5 mm
Mesh Size: 50 mm
flame-retardant according to DIN 4102 (B1)
with reinforced selvage cord
Rope Diameter: 2.3 mm
Mesh Size: 45 mm
flame-retardant according to DIN 4102 (B1)
with reinforced selvage cord
Rope Diameter: 5.0 mm
Mesh Size: 100 mm
flame-retardant according to DIN 4102 (B1)
with reinforced selvage cord
Rope Diameter: 3.0 mm
Mesh Size: 45 mm
flame-retardant according to DIN 4102 (B1)
with reinforced selvage cord
Rope Diameter: 2.3 mm
Mesh Size: 25 mm
flame-retardant according to DIN 4102 (B1)
with reinforced selvage cord
Rope Diameter: 5.0 mm
Mesh Size: 45 mm
Edge Finish with Eyelets
at a distance of approx. 40 cm
Strap Width: 25 mm
Mesh Size: 200 mm
Material: polyester
galvanized steel cable
with aluminium clamps
Rope Diameter: 2.0 mm
Mesh Size: 100 x 100 mm
Edge Finish with Eyelets
at a distance of approx. 40 cm
Strap Width: 25 mm
Mesh Size: 100 mm
Material: polyester
galvanized steel cable
with aluminium clamps
Rope Diameter: 2.0 mm
Mesh Size: 50 x 50 mm
Rope Diameter: 5,0 mm
Mesh Size: 100 mm
Material: hercules rope with steel core
Mesh Connection: plastic clip system
Rope Diameter: 5,0 mm
Mesh Size: 45 mm
Material: hercules rope with steel core
Mesh Connection: plastic clip system