Safety nets complying with DIN EN 1263 class B1 can be tensed to a walk-on platform. For this, the protective net is placed inside the horizontal opening. Tension belts stabilize the surface and reduce the mesh sag to a minimum. The area created can be used as a working platform in accordance with the Workplace Ordinance. The finished netting construction is called working platform net.
The net must be fastened to the supporting structure at the edge with a maximum of 50 cm with tension straps. In addition, through the net traversal belts are to be threaded in a grid of maximum 2 x 2 m. Here you will find the right net material and the right straps. The network may only be used as a working platform network if all preconditions are met during assembly. Please see our information about the guidelines for working platform nets.
according to EN 1263-1 and DGUV 201-010
Rope Diameter: 5.0 mm
Mesh Size: 45 mm
Material: high tenacity polypropylene, knotless
according to DIN 60060 & EN 12195
Max. Tensile Force: 1500 daN
two-piece load restraint assembly with heavy ratchet