Heavy-Duty Anchor Bolt M12 with Eyelet

Heavy-duty anchor bolt for anchoring fall safety nets in non-cracked concrete (C20/25).

Approved anchorage system for construction safety nets in conformity with DIN EN 1263 and BG regulation no. 179.

• Very little force is required to put the anchor in place
• Immediately loadable – no waiting period
• No setting tools required
• Can be set flush-mounted
• An even expansion effect and load distribution thanks to the triple expanding sleeve
• Safe installation through applying stipulated torque during anchoring process
• Force-controlled / torque-controlled heavy-duty expansion anchor of galvanised steel with eyelet
• May only be used in dry indoor spaces

Recommended load of a single anchor without marginal influence: 6.0 kN

Dowel Diameter: 12 mm

Dowel Length (l): 75 mm

Effective Anchoring Depth (h_ef): 63 mm

Nominal Drill-Bit Diameter (d₀): 18 mm

Min. Center-to-Center Distance (s_min): 165 mm

Min. Edge Clearance (c_min): 115 mm

Min. Component Thickness (h_min): 160 mm

Drill Hole Depth (h₁): 85 mm

Through-Hole in the Component to be Connected (d_f): 14 mm

Torque During Anchoring (T_inst):35 Nm

Drill Cutting Diameter (d_cut): 18,5 mm

Center-to-Center Distance (s cr, N): 189 mm

Edge Clearance (c cr,N): 95 mm

Screw Length: 90 mm

Inner Diameter of Eyelet: 17 mm

Outer Diameter of Eyelet: 34 mm