Belt Strap Cargo Net for Transporters up to 2t 1525 x 3025 mm - Complete Set

LoginRegister

0 Item

You do not have any products in your shopping cart yet.

CheckoutShopping Cart

Details
Technical Specifications
More Pictures
Reviews

Ask a Question

Description

Cargo net combination with additional, close-mesh covering net for the flexible securing of cargos. Suitable for vehicles with a permissible maximum weight up to 2 tons. The cargo net net consists of high-strength, extremely tearproof polyester. It can be used for securing both form-fit and force-fit loads. Delivery includes the appropriate tension belts (6 pieces) as well as detailed operating instructions.

Our cargo nets nets are produced in conformity with the currently valid standards and regulations. The nets have GS test certification as well as an identification mark showing conformity with the VDI 2700 ff. and EN 12195-2 standards.

Maximum Loading Weight

LC_{lashing point}:	400 daN
LC_{net total}:	1300 daN

Calculation for 4 tension belts, 2 in each direction
Frictional coefficient µ		Maximum loading weight in kg (per net)
Frictional coefficient µ		α = 20° β = 6°	α = 20° β = 55°	α = 65° β = 6°	α = 65° β = 55°
metal on metal	0.1	270	660	270	380
wood on metal metal on wood	0.2	450	820	610	570
non-slip mat	0.5	3000	1900	2300	1800
non-slip mat	0.6	4600	3000	3900	3200

Lengthwise acceleration coefficient: 0.8
Crosswise acceleration coefficient: 0.5

cargo net calculation

Technical Specifications

:1525 x 3025 mm

:high tenacity polypropylene, knotless, polyester

:Ø 2.3 mm (cover net)

:25 mm

:20 x 20 mm, 300 x 300 mm

:quadratic (square)

:seamed

:with edged polyester tape (approx. 25 mm wide), with D rings

:D rings out of steel, directly sewn to the strap

:400 daN (lashing point), 1300 daN (net total)

:10%

:EN 12195-2, VDI standard 2700

:GS verification certificate

:-40 to +80 °C

:165 °C

:30 °C

:0%

:very good/good

:good/not good

:good

:very good

:good

:90%

:good long-term flexibility, little elongation

:stays flexible

:low contraction

:no contraction

:melting

:isolating, no electrical conductivity

:cargo net incl. 6 tension belts (two-piece load restraint assembly, max. tensile force: 1000 daN, length: 2.00 m)

:63079010

:5.10 kg

Download product data sheet (PDF)

Technical Specifications

:1525 x 3025 mm

:high tenacity polypropylene, knotless, polyester

:Ø 2.3 mm (cover net)

:25 mm

:20 x 20 mm, 300 x 300 mm

:quadratic (square)

:seamed

:with edged polyester tape (approx. 25 mm wide), with D rings

:D rings out of steel, directly sewn to the strap

:400 daN (lashing point), 1300 daN (net total)

:10%

:EN 12195-2, VDI standard 2700

:GS verification certificate

:-40 to +80 °C

:165 °C

:30 °C

:0%

:very good/good

:good/not good

:good

:very good

:good

:90%

:good long-term flexibility, little elongation

:stays flexible

:low contraction

:no contraction

:melting

:isolating, no electrical conductivity

:cargo net incl. 6 tension belts (two-piece load restraint assembly, max. tensile force: 1000 daN, length: 2.00 m)

:63079010

:5.10 kg

Belt Strap Cargo Net for Transporters up to 2t 1525 x 3025 mm - Complete Set | Safetynet365

Customer Reviews

Tobias L. - 09/08/2021

The net serves its purpose perfectly. In our case, it would be easier if one side was always firmly attached to the lashing points in the vehicle with snap hooks and short straps rather than tensioning belts. Nevertheless, the net is great and makes it easier to secure goods of different heights in the vehicle. translated, original text: "Das Netz erfüllt seinen Zweck einwandfrei. Bei unserem Einsatz wäre es einfacher, wenn eine Seite nicht mit Spanngurten, sondern mit Karabinern und kurzen Bändern immer fest an den Laschpunkten im Fahrzeug befestigt wären. Trotzdem ist das Netz Klasse und erleichtert die Sicherung von unterschiedlich hohen Gütern im Fahrzeug."

*1 excluding VAT plus shipping charges*2 including VAT plus shipping charges