Snow fence of rot-resistant polyethylene fabric with integrated installation poles of glass fibre-reinforced polyester (flexible). The fabric is additionally reinforced with polypropylene along its length. The poles are fitted with polyamide cover caps and two eyelets for anchoring the guy ropes. Delivery includes 18 ground sleeves of impact-resistant GRP, 36 steel ground anchors and 18 guy ropes for tensioning at top and bottom.
If desired, the snow fence can be delivered with additional supporting discs (Ø 170 mm) for the ground sleeves. By increasing the support surface, the discs prevent the fence from sinking into very soft ground. The ground sleeves are then simply inserted through the discs so that the latter stabilise the standing structure like a flat washer.
Its low net weight makes the snow fence easy to transport and to handle. It can therefore be put up and dismantled quickly and efficiently. As the installation poles are already firmly connected to the fabric and these are simply inserted into the ground sleeves, the fence can also be moved quickly. The unique structure of the mesh creates optimal snowdrift. The fabric and the poles are rot-resistant and their weather-resistance and UV stability make them suitable for many years of outdoor use.
Several snow fences should always be positioned staggered/offset in relation to one another, to allow continued deer crossing. However, always leave the installation of snow fences to professionals. If they are installed incorrectly, the fences are practically ineffective or can even increase the impact of the snowdrifts. When installed correctly, your one-time purchase will give many years of service. On the bottom of our products, you always find installation guidelines for each individual snow fence.
1. Unroll the fence
2. Drive in the ground sleeves (before driving them in, tighten each section individually)
3. Mount the caps with the tensioning ropes onto the posts
4. Drive in the ground anchors and brace the fence with the top and bottom ropes
Caution: Drive in the ground anchors as far as possible to their full length and pretension and/or tension them. Do not forget to tension the structure at the bottom.
To present as small a surface to the wind as possible, and to enable deer crossing, individual 50-metre fences should be positioned staggered in relation to one another.
This product will be transported by haulier. When placing your order, please always state a telephone number so that the haulier can reach you when making the delivery.
Write the first Review!