Climbing Net by the m² (Custom-Made)

Configure your own individual made-to-measure climbing net. Choose one of the above colors and enter the desired measurements into the appropriate fields. Please also select the type and model of your preferred anchorage system. The surface area and price of the net will then be automatically calculated and shown. The size of the edge mesh can vary. The size is adjusted in such a way that the mesh fits the ordered size, while preventing ensnarement points. The net is suitable for both horizontal and vertical use.

Material

The rope used is four-shaft, 16 mm-thick polypropylene cordage without a steel core. At the crossing points the ropes are intertwined without losing their shape. The material is of course 100% non-toxic, and contact with mucus membranes (mouth, eyes) is completely safe as well. Thanks to their weather-resistance and UV-stability, our climbing nets are suitable for both outdoor and indoor use.

Border Design

You can choose between various types of anchorage for the border (see table below). Depending on the type of mesh, these are directly pressure-grouted (aluminium clamp) or screwed to the rope-ends of the net. Please always state the basic frame measurements for the nets. The measurements relate to the distance from one anchorage point to the next.

	Plastic thimble, Ø 30 mm Item no. 457W Material: HDPE, inside diameter: 30 mm, color: beige, pressure-grouted with aluminium clamp
	Rope loop Item no. 464 Inside diameter as required, pressure-grouted with aluminium clamp

Fastener Positions

Fasteners all around	Fasteners at one long and one short side respectively
Fasteners at both long sides and one short side	Fasteners at both short sides and one long side
Fasteners at both long sides	Fasteners at both short sides
Fasteners at one long side	Fasteners at one short side
Completely without fasteners

Safety Standards

Our climbing nets fulfil all the requirements of the European Standards for Playground Equipment EN 1176. The number of meshes and the size of the border mesh have been adjusted in such a way that they cannot create ensnarement points for head and torso.